Environmentally friendly bentonite from high-quality clays of Russian deposits, modified with soda ash. Produced on the basis of highly colloidal clays of the Orenburg deposits. It is recommended for use as a structurant of drilling fluids.
Used for the preparation of drilling fluids; recommended for the implementation of the technology “wall in the ground”; used as a binder in the pelletization of finely ground metals. It is also used for waterproofing civil structures.
- Rapid mixing.
- High structural and mechanical properties of suspensions based on PBMV bentonite clay powder.
- It has a maximum yield of solution in the range of parameters that are not suitable for this brand.
- Compatible with all components of the drilling fluid.
- Preparation. Easy shutter. 30 minutes after mixing, ready for use.
Recommended concentrations for solution:
viscosity 15 mPa * s – 60-80 kg / m³,
viscosity 20 mPa * s – 80-90 kg / m³.
|The output of the clay solution with a viscosity of 20 MPa, m³ / t||14,5-15,5|
|Moisture content, %||8-10|
|Wet sieve analysis, sieve residue, %|
|with mesh № 05||missing|
|with mesh № 0071||no more than 2,5|
|Content of free soda, g / 100 g of clay powder||2,0-2,5|
|Filtration rate, cm³||17-18|
|The thickness of the peel, mm||1,5-2,0|
Dry rooms, if possible in closed original packaging.
The manufacturer guarantees compliance with the parameters under the conditions of storage and transportation.
The responsibility of the manufacturer applies only to this information about the product, since its use is not subject to our control.